Quote:
Originally Posted by Knufire
According to the product data on robotmarketplace.com, they should have the same bore though. Strange.
|
If you go to Other Documentation > Assembly Instructions, it pulls up a datasheet from VexPro with the following:
Quote:
Note: The Colson Live Hub is designed to be pressed into the bore of Colson Performa Wheel. There is a
.0125” interference fit between the hub and bore of the Colson Wheel. This will require an arbor press or
large vise to assemble. It is NOT recommended to hammer the hub into the bore, as this can lead to damage
and misalignment between the hub and wheel.
|
You'd think they'd make that info readily accessible though...