Quote:
Originally Posted by Tom Line
However, I'll warn you that the contrast adjustment on the 1011 and 1013 are not nearly as good as the older 206. In the past, you could hold a white sheet up in front of the camera and get it to hold the contrast so low that everything would appear dark except the really lit-up areas. The 1011 and 1013 will hold this until you repower the camera, then they reassert some low-default value. If you want the same effect on the newer cameras you'll have to put some type of filter (like a sunglass lens) over the front of it.
|
I think you are talking about the exposure, not the contrast right? I beleive both the M1011 and the M1013 cameras have a setting that changes the exposure to "Hold Current" which works over power cycles. However the M1013 will still adjust the exposure slitly over time. For using vision, I recommend the M1011. I would also recommend removing the code from the robot that sets the camera settings, and only use the settings on the camera's webpage.