|
Re: Spark Motor Controller vs. Victor SP
I just took a Victor SP and a SPARK out of their boxes and weighed them.
SPARK + one PWM Cable = 86 gram (0.19 lb)
Victor SP (pre-wired with PWM Cable and ~12 inches 12AWG leads) = 104 gram (0.23 lb)
Adding a foot of 12AWG* to the SPARK will bring it to about 98 gram (0.22 lb).
[edit] Also need to add two crimp rings or forks to the SPARK. Total weights are looking very close.
---------
*Wire tables usually indicate about 20 lb per 1000 ft (9 gram per ft) for 12 AWG bare copper wire. Insulation types vary, but about 3 gram per foot is a reasonable guess.
__________________
Richard Wallace
Mentor since 2011 for FRC 3620 Average Joes (St. Joseph, Michigan)
Mentor 2002-10 for FRC 931 Perpetual Chaos (St. Louis, Missouri)
 since 2003
I believe in intuition and inspiration. Imagination is more important than knowledge. For knowledge is limited, whereas imagination embraces the entire world, stimulating progress, giving birth to evolution. It is, strictly speaking, a real factor in scientific research.
(Cosmic Religion : With Other Opinions and Aphorisms (1931) by Albert Einstein, p. 97)
Last edited by Richard Wallace : 19-01-2016 at 08:54.
|