Replying from home, but same person (not on the team account).
Quote:
Originally Posted by ozrien
Does the driver-station still say teleop-enabled when the Jags are misbehaving?
If so then the problem is likely RIO <=> Jag, not Gamepad <=> RIO.
|
The drivers station does show Teleop-enabled, with communication, robotcode, and joystick indicators all green.
Quote:
Originally Posted by ozrien
Are the eclipse-plugins up-to-date 1/15/2016? Prolly not the issue but worth checking.
|
I can double check this today. I am not sure if we updated it since getting everything installed the Monday after kickoff. Hopefully it is that simple.
Quote:
Originally Posted by ozrien
What are the Jag LEDs doing when they are misbehaving. Be sure they both show up in the roboRIO web-based config okay.
|
Both Jags have solid yellow LEDs while the robot is enabled, indicating they are getting a signal. The roboRIO webpage shows the Jags with the IDs in the above code.
At one point we had the joystick axis values printing out to a log to check if the value was changing, but the joystick Y-axis remained at zero no mater where the actual joystick was. Again, the DS showed that the joystick moved, but the code was not seeing this change.