Quote:
Originally Posted by adciv
The blue light turns on when the camera is active. When it's not in use, the light should be off.
As to the reset issue, i'd watch the power LED during operation to see what the RIO itself is doing. If it's actually resetting, I'd check the wiring (power & ethernet) before blaiming the camera.
|
If it helps here is the error message from the drive station console
Warning 44004 FRC: The Driver Station has lost communication with the robot. Driver Station
Warning 44002 Ping Results: link-bad, DS radio(.4)-bad, robot radio(.1)-GOOD, cRIO(.2)-GOOD, FMS-bad FRC: Driver Station ping status has changed. Driver Station
Warning 44004 FRC: The Driver Station has lost communication with the robot. Driver Station
Warning 44002 Ping Results: link-bad, DS radio(.4)-bad, robot radio(.1)-bad, cRIO(.2)-bad, FMS-bad FRC: Driver Station ping status has changed. Driver Station