Quote:
Originally Posted by Mike Copioli
Thank you for the feedback. We do here this argument often however to date we have had no reports of this actually happening. Which leads me to believe that this is not a problem at all.
But in the interests of teams I ask are there any teams that have had this issue?
If there are any teams that have Talon SRX's or Victor SP's that need the leads replaced send them back to us. We will gladly replace the leads. But again I just do not have any evidence that this is a REAL problem.
Also,
Neither the Talon SRX of Victor SP are water tight so please do not expect survival after immersion in water.
|
I have not yet seen either a Talon SRX nor a Victor SP with leads shortened or damaged to the point of unusability, but years of being around the idiocy of teenagers and seeing old motors with layers of soldered on wire from being cut to a couple inches have given me my doubts.
It is quite nice to know that there's some amount of support for them, I will be sure to pass it on when that concern arises.
I apologize for the misinformation about the watertightness or lackthereof. I suppose that must have gotten mixed up in one of the various water game conspiracy theories.