Thread: AndyMark 3CIM4U with Rhino Track Output Shaft Issues
View Single Post
  #3   Spotlight this post!  
Unread 21-01-2016, 21:46
Bluman56's Avatar
Bluman56 Bluman56 is offline
Mentor Without Borders
AKA: Nikita
FRC #2579
Team Role: Mentor
  
Join Date: Jan 2015
Rookie Year: 2013
Location: Brooklyn
Posts: 147
Bluman56 is a jewel in the roughBluman56 is a jewel in the roughBluman56 is a jewel in the roughBluman56 is a jewel in the rough
Re: AndyMark 3CIM4U with Rhino Track Output Shaft Issues
Quote:
Originally Posted by BeardyMentor View Post
we are not using this combo, but the fix is relatively simple if you have a lathe. Buy some 4140 1/2" hex stock and turn a new output shaft. If you dont have one, try talking to teams around you. This is a pretty quick job and it should not be hard to convince them to make it. If you cant find anyone local, I would be happy to make you longer output shafts if you purchase the material.
We realized this is what we would have to do, it's just a little peculiar that we have to do it considering that the Rhino Track page specifically states that the 3CIM4U is compatible with it. I was hoping we were doing something wrong.