Thread: PDP Lights are flashing Orange
View Single Post
  #3   Spotlight this post!  
Unread 26-01-2016, 17:55
Slade Slade is offline
Registered User
FRC #4471 (Spartrons)
Team Role: Programmer
  
Join Date: Jan 2015
Rookie Year: 2013
Location: Florida
Posts: 24
Slade is an unknown quantity at this point
Re: PDP Lights are flashing Orange
Quote:
Originally Posted by TikiTech View Post
Did you check the blade fuses?

More info on the PDP


http://content.vexrobotics.com/vexpr...e-20150305.pdf

Specifically the 20a VRC, PCM fuse.

In addition the manual linked above has your failure state as : Robot is disable / Sticky Fault Present.
Was any code changed recently?

Check here on the various LED errors, scroll down to PDP.

http://wpilib.screenstepslive.com/s/...uick-reference

Also, did you do any firmware updates? Were all electronics updated?

Good luck,
Aloha
The blade fuses were checked and fine

We did make a change earlier but we reverted them. Also I had tried to put a blank robot code on and we're still getting the same error.