28-01-2016, 20:04
|
 |
Mad Scientist
AKA: Me
 FRC #2040 (DERT) Team Role: Engineer
|
|
Join Date: Apr 2005
Rookie Year: 2003
Location: Peoria, IL
Posts: 1,964
|
|
|
Re: Bumper Update
Quote:
Originally Posted by Blizzard3197
Okay, so the gap for the ball is 10-12 inches, right? And the rules state that there must be 8 inches on either side of the opening from the corner out, like figure 4-3, bottom left robot. So 10+8+8=26, which is a lot. And that would not work for our previous diagram for our robot.
Though we're playing around with the idea of an arm/sucker combo with wheels to suck up the ball and the arm to aim.
|
Your math is correct. If you want to bring the ball in, through the bumpers, at the balls widest point then you need at least 26" (10"+8"+8") of frame perimeter on that side.
__________________
___________________
"We are not now that strength which in old days moved earth and heaven; that which we are, we are;
One equal temper of heroic hearts, Made weak by time and fate, but strong in will
To strive, to seek, to find, and not to yield. "- Tennyson, Ulysses
|