|
Re: pic: 2929's Forklift + Climber, almost operational
Quote:
Originally Posted by JohnFogarty
I hope you've done the math on the volume of air those cylinders you've chosen will need to extend and then retract.
|
Did this early on.
As it happens, if you use 1.5''-bore, 2'-stroke cylinders and run them out at 30PSI and in at 60PSI, you're more than covered with two black clippard tanks.
__________________
"Mmmmm, chain grease and aluminum shavings..."
"The breakfast of champions!"
Member, FRC Team 449: 2007-2010
Drive Mechanics Lead, FRC Team 449: 2009-2010
Alumnus/Technical Mentor, FRC Team 449: 2010-Present
Lead Technical Mentor, FRC Team 4464: 2012-2015
Technical Mentor, FRC Team 5830: 2015-2016
|