|
Re: PWM to CAN LabView arcade drive
Quote:
Originally Posted by Leif Asher
The drop down is set to CAN talons, which is what I am using, but that doesn't change the index of the motor, still set to 'PWM 0' and 'PWM 1', which doesn't seem right to me.
|
You will have to delete the two boxes that have PWM 1 and PWM 2 in them. After they are deleted, right click on the motor nodes on the begin and create a new constant. From there, you can enter the ID number of the CAN Talon, and you should be good to go.
__________________
I'm right 90% of the time, so why worry about the other 3%?
|