|
Re: How the 15 inches is measured
Quote:
Originally Posted by Kevin Sevcik
If I were an inspector and I wanted some assurance that the controls on a mechanism were keeping it legal, I'd place the robot with the frame perimeter 15" from a wall and ask the team to actuate the mechanism. This is also a useful way to test such a mechanism yourself. If you hit the wall, you need to look at better ways to control your deployment.
|
Of course, you are assuming the wall sits at an exact 90 degrees relative to the floor 
__________________
2007 - Present: Mentor, 2177 The Robettes
LRI: North Star 2012-2016; Lake Superior 2013-2014; MN State Tournament 2013-2014, 2016; Galileo 2016; Iowa 2017
2015: North Star Regional Volunteer of the Year
2016: Lake Superior WFFA
|