|
Re: Dart actuator gets jammed
Wow... we just experienced the same problem here... 6" Dart... we just took it apart and found the 2 bearings in the bearing block to be totally different than what the instruction are calling for.
The assy instruction call for 3/8" ID (AM-0209) but the bearing we received are 1/2" flange... This cause the shaft to wobble inside that bearing block....
Not sure what to do next, we also notice that the black plastic block with the magnet is binding inside the square tube... look like the magnet is sticking up just a bit and binding...
Will keep you posted on what we are doing... anybody else?
|