Thread: Bumpers sticking out 1" beyond frame perimeter
View Single Post
  #5   Spotlight this post!  
Unread 14-02-2016, 21:18
jamesmcip jamesmcip is offline
It's fine, don't worry about it
AKA: James Cipolletti
FRC #4908 (Dragons)
Team Role: CAD
  
Join Date: Mar 2014
Rookie Year: 2014
Location: Duxbury, MA
Posts: 33
jamesmcip is a glorious beacon of lightjamesmcip is a glorious beacon of lightjamesmcip is a glorious beacon of lightjamesmcip is a glorious beacon of lightjamesmcip is a glorious beacon of lightjamesmcip is a glorious beacon of light
Re: Bumpers sticking out 1" beyond frame perimeter
Quote:
Originally Posted by Boltman View Post
Just make it "the gap" 1 inch or less considering the hard parts/fastner of your front bumper. 1" is not more than 1".

"Hard BUMPER parts allowed per R21-A, R21-E, R21-F, and R21-G must not extend more
than 1 in. beyond the FRAME PERIMETER with the exception of minor protrusions such as
bolt heads, fastener ends, rivets, etc"
It believe that includes the 3/4" of the plywood for the bumper, meaning the gap must be less than 1/4". Clearance holes it is...