Thread: 8020 fastener question
View Single Post
  #19   Spotlight this post!  
Unread 15-02-2016, 11:42
dirtbikerxz's Avatar
dirtbikerxz dirtbikerxz is offline
Captain | Driver | CAD | Junior
AKA: Rohit Gondi
FRC #3991 (KnightVision)
Team Role: Driver
  
Join Date: Nov 2014
Rookie Year: 2015
Location: Baton Rouge, LA
Posts: 492
dirtbikerxz has much to be proud ofdirtbikerxz has much to be proud ofdirtbikerxz has much to be proud ofdirtbikerxz has much to be proud ofdirtbikerxz has much to be proud ofdirtbikerxz has much to be proud ofdirtbikerxz has much to be proud ofdirtbikerxz has much to be proud ofdirtbikerxz has much to be proud ofdirtbikerxz has much to be proud of
Re: 8020 fastener question
Quote:
Originally Posted by GeeTwo View Post
We procured this locally at Bayou Steel, but it also seems to be available at OnlineMetals.com.
Stroke of good luck, turns out we do have c-channel of that size in the workshop.
Question is, do you know how long each strip of channel should be to join the two 5 foot 1x1 8020, and keep it stable. It won't have too much stress on it, we are basically using this as our pit frame. I was imagining that we use 6 inches of channel per joint. 3 inches on each strip of 8020, is that enough?
Reply With Quote