View Single Post
  #1   Spotlight this post!  
Unread 15-02-2016, 14:10
klhutchi klhutchi is offline
Registered User
FRC #5736
 
Join Date: Feb 2016
Location: New York
Posts: 7
klhutchi is an unknown quantity at this point
PCM output LED not lighting

We are trying to use Pneumatics for the first time and believe we have the PCM wired correctly. When enabled we have the strobe flashing green light on status but none of the output Solenoid LED's under the ports will light up. Any ideas as to the issue, Coding? Wiring? or possibly a dead PCM...

we have 24V Festa Double solenoids and switched the PCM to 24V bridge, but cannot send voltage to the outputs anyone have similar issues.
Thanks for your help/insight