|
Re: Recommended configuration for practice robot
We've done two options.
1. Configure the radio of each robot with the Radio Configuration tool, then change the SSID of one of them. Connect to the AP that coorespeonds with the robot its on.
2. This is for older years, but we would power the D-links with USB power (5v), set them as Access points on 5Ghz, different SSID's, then have the radio on the robot bridge to it. This isn't suggested anymore.
The only time you can't have the same team number is when you're on the same network. However you could have the radios on the robots bridge to a central router if they have different team numbers.
|