View Single Post
  #49   Spotlight this post!  
Unread 16-02-2016, 23:45
kprzewodek's Avatar
kprzewodek kprzewodek is offline
Registered User
AKA: Kevin Przewodek
FRC #0862 (Lightning robotics)
Team Role: Mentor
 
Join Date: Jan 2011
Rookie Year: 2000
Location: Michigan
Posts: 58
kprzewodek is on a distinguished road
Re: 2016 Bosch motor 6004 RA3 194-06

Quote:
Originally Posted by cedwards View Post
Thanks Kevin


So we can hook up a pwm cable that runs from the analog breakout from the roborio. Black wire (ground) to Pin #4, Red wire (positive 5v?) to Pin #2 with a R-200Ohm resistor. Finally the White wire is just cut off and goes to nothing?.

Does that sound correct?

Thanks much.
Seems right although some have had issues getting the roborio to pick up the signal at 5V. The difference between peaks and valleys is less than when your putting 12 V through which this hall it is really designed for. If you have success getting 5V to work please let me know.