|
Re: PWM Cable Voltage
Connected to a PWM port with the standard wire setup, the black wire is the 0V reference, Red is approximately 6V (intended to provide power to servos), and the white wire switches back and forth between 0V and 5V to provide a pulse width modulated (PWM) signal intended to control a servo or motor controller.
__________________
If you can't find time to do it right, how are you going to find time to do it over?
If you don't pass it on, it never happened.
Robots are great, but inspiration is the reason we're here.
Friends don't let friends use master links.
|