Quote:
Originally Posted by abilash123
Our drive is a 6 wheel tank drive running off 4 cim motors in a gearbox. Four of the 6 wheels are large 10 inch wheels while the other 2 are 6inch wheels. We have been running into huge issues with our drive when we try to turn and go up ramps. The voltage of our battery drops really low and it causes brownouts. This makes it impossible to drive. Does anyone know how to stop the drive from dropping the voltage of the battery?
|
greetings,
This could be caused by several things. How long is your robot? If you have fairly grippy wheels, there may be too much force on the wheels to turn easily. However, going up the ramp shouldn't be too bad. a couple of things come to mind:
1. you have inefficiencies in the drivetrain (gearboxes aren't put together properly, lack of lube, chain/belt over tensioning, you get the idea)
2. Your gear ratio may be too large for the 10" wheels you are using. (please post again with this info)
3. Electrical resistance in you system. If you have a bad connection or wire and draw more current when going up the ramp or turning, the higher resistance will cause a significant voltage drop.
I think it's time to do some serious trouble shooting. let me know what you find out!