|
Re: Team 5720 Rhino Tracks Problems
It sounds like you have the tension on the belt too loose. In the instructions we give an example of what we feel the appropriate tension should be. Also, I would double check the spacers and pulley alignment down the side of the track. If one of the pulleys is being forced into misalignment it could cause it to try to ride up the V on the belt and jump the pulley.
__________________
#6
Alumnus of FLL 2000 ~ Alumnus of FRC173 2002-2005 ~ Mentor of FRC173 2006-2007 ~ Mentor of FRC 3780 2014
FIRST Volunteer since 2003
Manufacturing Manager
AndyMark, Inc.
http://www.andymark.com
|