|
Re: CDF Discussion, post Team Update 14
This is second-hand but apparently, the countersunk screws were being overtightened when the CDFs were originally assembled.
This started stress cracks in the polycarb that were then aggravated by robots smashing into them.
The damage to the CDF occurred along the stress cracks.
The counter bore replacement of the countersink seems to have eliminated the stress cracks.
__________________
"Rationality is our distinguishing characteristic - it's what sets us apart from the beasts." - Aristotle
Last edited by Mark McLeod : 02-03-2016 at 12:00.
|