03-03-2016, 12:41
|
 |
no bag, vex only, final destination
AKA: Pinecone
 FRC #0228 (GUS Robotics); FRC #2170 (Titanium Tomahawks) Team Role: Mentor
|
|
Join Date: Dec 2008
Rookie Year: 2006
Location: Glastonbury, CT
Posts: 7,630
|
|
|
Re: Removing tread from colson wheels
The Colson rubber is molded onto the wheel hub at manufacturing time. It doesn't really detach and it would be difficult to attach it to a different core without the tread slipping on the core.
For a wheel you need such a large bore for, your best best is to use fabric backed tread material like roughtop or wedgetop. If you want to use smooth rubber that is vaguely Colson like, I recall somewhere on McMaster you can find fabric backed polyurethane ideal for attaching to wheels.
You could try drilling out a larger Colson wheel, but 3" is a bit extreme.
__________________
Mentor / Drive Coach: 228 (2016-?)
...2016 Waterbury SFs (with 3314, 3719), RIDE #2 Seed / Winners (with 1058, 6153), Carver QFs (with 503, 359, 4607)
Mentor / Consultant Person: 2170 (2017-?)
---
College Mentor: 2791 (2010-2015)
...2015 TVR Motorola Quality, FLR GM Industrial Design
...2014 FLR Motorola Quality / SFs (with 341, 4930)
...2013 BAE Motorola Quality, WPI Regional #1 Seed / Delphi Excellence in Engineering / Finalists (with 20, 3182)
...2012 BAE Imagery / Finalists (with 1519, 885), CT Xerox Creativity / SFs (with 2168, 118)
Student: 1714 (2009) - 2009 Minnesota 10,000 Lakes Regional Winners (with 2826, 2470)
2791 Build Season Photo Gallery - Look here for mechanism photos My Robotics Blog (Updated April 11 2014)
|