Thread: Can connect to the roboRIO by IP but not by hostname
View Single Post
  #12   Spotlight this post!  
Unread 08-03-2016, 00:38
SuperBK's Avatar
SuperBK SuperBK is offline
Registered User
AKA: BrianK
FRC #1225 (Amperage Robotics)
Team Role: Mentor
  
Join Date: Jan 2007
Rookie Year: 2006
Location: Henersonville, NC
Posts: 357
SuperBK is just really niceSuperBK is just really niceSuperBK is just really niceSuperBK is just really nice
Re: Can connect to the roboRIO by IP but not by hostname
Can you ping the roborio by host name? Does it display the correct IP when you ping? You might try ipconfig /flushdns (from a prompt) to clear any cached names.

Has anyone by chance modified the hosts file by adding the host name to it?

We switched to static addresses this year, added its name to the hosts file and connected at our first district competition just fine. We set to roboRio to .2 and the driver station to .5 Note that the driver's station must have a mask of 255.0.0.0. Also, I believe we did turn off IPv6 on the DS. I haven't heard about needing it. Maybe Greg McKaskle could comment on that.

The other tip that keeps coming up is plugging the roborio into the connector on the radio closest to the power plug.

Brian
__________________
Brian K
Team 1225 Robotics Mentor