[Bruceb]

Originally Posted by MrRoboSteve

When does the radio reboot occur? Can you post links to matches where the radio is rebooting?

1. Since you've replaced everything else, consider replacing the wire from the PDP to the VRM. Be sure you're using stranded wire.
These wires are only about 6 inches long an pretty hard to wiggle but I will look at that

2. Make sure that all of the wire along the path is tacked down with zip ties (use zip tie bases if needed). You want to minimize wiggling.

3. How is your radio fastened to the robot?

with velcro not the regular stuff that kind that sticks to itself whatever that is called.
Been doing that for years