Thread: What types of metal do you use for your robot in general?
View Single Post
  #21   Spotlight this post!  
Unread 22-03-2016, 21:13
Chief Hedgehog's Avatar
Chief Hedgehog Chief Hedgehog is offline
Mentor
FRC #4607 (C.I.S.)
Team Role: Coach
  
Join Date: May 2013
Rookie Year: 2012
Location: Becker, Minnesota
Posts: 532
Chief Hedgehog has a reputation beyond reputeChief Hedgehog has a reputation beyond reputeChief Hedgehog has a reputation beyond reputeChief Hedgehog has a reputation beyond reputeChief Hedgehog has a reputation beyond reputeChief Hedgehog has a reputation beyond reputeChief Hedgehog has a reputation beyond reputeChief Hedgehog has a reputation beyond reputeChief Hedgehog has a reputation beyond reputeChief Hedgehog has a reputation beyond reputeChief Hedgehog has a reputation beyond repute
Re: What types of metal do you use for your robot in general?
Quote:
Originally Posted by bigbeezy View Post
Vast majority is 1x1 and 1x2 Versatubing. We do have some 3/4x3/4x1/16 tube this year.

For plate we mostly use 0.090" 6061, with the occasional 0.040" for light brackets as we can bend it in house. We do have 1/4", 1/2" and even 1" thick AL on the bot this year.

Most hex shafts are AL from VEX, though we do use some steel hex from McMaster. We tried the Thunderhex and I'm not sure if it was just the oversized batch but it was a nightmare to work with and we won't be going back.

We rivet most everything and get critical pieces welded by our local sponsors.
I concur on the Thunderhex. What a horrible product - we had one student that spent about 2 days just filing down the Thunderhex so that we could use it. We will be looking at other stuff for next year.
__________________

"An error does not become a mistake until you refuse to correct it" ~JFK
Reply With Quote