|
Re: FRC Stronghold team standards
Make sure to get 1/2" tube (O.D) rather than 1/2" pipe which is is an ID size.
We used 1/2" Alluminum Tube, about .0625 Wall. Used a file in the lathe to slightly reduce the OD of the bottom few inches and put a chamber on the tip to make it easy to install. Quick hit with Scott Brite pad to shine it up.
__________________
Thank you 2016 Alliance Partners - 948, 1510, 2046, 2521, 2980, 2990, 4911, 4683
|