|
Re: Actual 120 PSI for Storage
Quote:
Originally Posted by JesseK
The software for pneumatics is pretty sweet - plug everything in, initialize something and away it goes.
The problem is, the cutoff of the automated switch happens anywhere between 110 and 115 PSI. How are teams able to get 120 PSI of storage volume? Is that switch adjustable?
(caveat - I haven't done more than a cursory look over pneumatic rules since 2011, which is when the electronics team took over that duty).
|
we noticed the same thing. a year or two ago there was a thread that stated that the switches were calibrated in the factory and could not be adjusted by us (even though there is an adjustment screw on the switch). I'll try and search for the thread and repost it here.
found it:
http://www.chiefdelphi.com/forums/sh...nason+swi tch
__________________
Currently: Coach FRC 1086/FTC 93
2006-2011 Coach FRC 2106/FTC 35
If you come to a FRC event to see a robot competition, you are missing the point.
Last edited by wilsonmw04 : 24-03-2016 at 09:57.
|