Quote:
Originally Posted by waialua359
Sorry for not responding earlier, I just read this.
The zip ties on the sides of the bumper is our fault. One of my kids put them on for the sake of doing it which was not neccessary.
As for the corner in question, he did that because the corner in was somehow bent a little after a much earlier previous match and he used zipties to try and straighten them out. After being asked to secure it with screws, we did it in the heat of the moment because I didnt want to miss a match. I do still believe that the bumper was within the height requirements though. The robot passed reinspection.
Was it measured on the field?
I think it was more of a cause and effect seeing the zip ties.
|
What doesn't make sense to me is why zip ties can not be used as a supplementary mounting system. Say you had 2 wood screws that were a little loose what is the problem with adding a few zip ties to help you out. The front of our 2015 off season bot was held to the drive train with zip ties held up fine through 5 quals and all the way through 3 final matches. The things are definitely strong enough in bulk to hold on a bumper.