|
Re: Compressor not Receiving Voltage (Need quick help if possible, currently at regio
Is the switch working? Try taking it out of the PCM, and stick 2 wires into the PCM pressure switch port. See if you get voltage coming out, and then short the 2 wires together, and see what the voltage is.
But it does sound like you have a dead PCM, if everything is plugged in correctly.
You do have it plugged into the CAN? And the Vin is plugged in correctly?
If you could post a picture, that might help people troubleshoot.
__________________
1771- Programmer, Captain, Drive Team (2009-2012)
4509- Mentor (2013-2015)
1771- Mentor (2015)
|