|
Re: COMM lost way to many times
Static was not an issue for us this year. Both events we attended had relatively high (for our area) humidity.
In the past we would attach a short piece of chain to the frame and let it drag on the carpet. Only a couple links on the floor were enough.
You should see the looks we would get from inspectors and judges. But, once we explained the logic, they never questioned our approach.
This year we felt that dragging chain was a much higher risk than static build up might cause.
After being FTAA at two separate events, one thing I can say with 100% certainty. The field this year will find and expose any fault your robot has.
__________________
CalGames 2009 Autonomous Champion Award winner
Sacramento 2010 Creativity in Design winner, Sacramento 2010 Quarter finalist
2011 Sacramento Finalist, 2011 Madtown Engineering Inspiration Award.
2012 Sacramento Semi-Finals, 2012 Sacramento Innovation in Control Award, 2012 SVR Judges Award.
2012 CalGames Autonomous Challenge Award winner ($$$).
2014 2X Rockwell Automation: Innovation in Control Award (CVR and SAC). Curie Division Gracious Professionalism Award.
2014 Capital City Classic Winner AND Runner Up. Madtown Throwdown: Runner up.
2015 Innovation in Control Award, Sacramento.
2016 Chezy Champs Finalist, 2016 MTTD Finalist
|