Thread: Robot Controller Reset Problems.
View Single Post
  #1   Spotlight this post!  
Unread 06-04-2003, 16:25
Joe P Joe P is offline
Registered User
#0647
  
Join Date: Feb 2002
Location: Killeen, Texas
Posts: 43
Joe P will become famous soon enoughJoe P will become famous soon enough
Robot Controller Reset Problems.
On our 4WD drive robot (two drill motors and two Atwoods)we had 8 good matches with no problems, then on our last match the clips fell out of one of our drill motor transmissions, so we replaced both the drill motor and transmission. Then we noticed the voltage readout on our OI would drop to around 7v and reset our RC, when taking our robot from full reverse to full forward or full left to full right. Then we tried changing the 40 amp breakers around and the problem went away for the next match. Then it came back later in another match. Does anyone have suggestions to narrow down our problem?