View Single Post
  #6   Spotlight this post!  
Unread 05-04-2016, 14:18
ozrien's Avatar
ozrien ozrien is offline
Omar Zrien
AKA: Omar
no team
Team Role: Mentor
 
Join Date: Sep 2006
Rookie Year: 2003
Location: Sterling Heights, MI
Posts: 521
ozrien has a brilliant futureozrien has a brilliant futureozrien has a brilliant futureozrien has a brilliant futureozrien has a brilliant futureozrien has a brilliant futureozrien has a brilliant futureozrien has a brilliant futureozrien has a brilliant futureozrien has a brilliant futureozrien has a brilliant future
Re: Talon SRX magnetic encoder issues

It sounds like you have a cabling issue between the magencoder and Talon.

You can confirm this by grabbing the self-test before and after reproducing the problem and observing that the absolute position (pulse width) and relative position (quadrature) disagree. That's one of the benefits of the CTRE magnetic encoder; you have two references that rely on different physical wires.

Most likely the ribbon cable needs to be replaced, or if you are using a breakout inspect the solder contacts/wiring.

Are you close or exceeding the peak rated RPM for CTREMagEnc_Absolute? If so then select CTREMagEnc_Relative and setposition() to what the absolute reading reports. See github examples/Talon SRX Software Reference manual for more info and peak RPM specs.
Reply With Quote