Quote:
Originally Posted by Wes2443
If it helps we have the ethernet to the roboRIO connected through the port furthest away from the power.
|
Note that it was specifically noted in Update 8 that you should plug into the other port. I think that would be worth a try.
Quote:
|
Control System Note:We have heard sporadic reports of link failure between the roboRIO and the radio after a cold boot, characterized by the amber and green link LEDs on the roboRIO Ethernet port remaining off (and a roboRIO reset resolving the issue). We have located a set of hardware that reproduces the issue and are currently investigating the root cause. In the meantime, teams experiencing this issue can connect the roboRIO Ethernet to the radio port labeled “18-24v POE” (next to the power connector) as a temporary workaround (the issue only affects the port labeled “802.3af POE”).
|