Quote:
Originally Posted by Cothron Theiss
Hey all,
I am currently working on a Swerve Module, mostly for practice and fun. My issue is that I'm wanting to use a CIM as the drive motor with the CIM shaft coaxial to the driving bevel gear. I'm hoping to use either the 3/8" Hex bore 15t bevel gear from WCP or a similar 3/8" hex bore bevel gear, but I'm not finding many options for going from the 8mm CIM shaft to a 3/8" hex bore. I can use a VersaPlanetary with the 3/8" hex output, but was wondering if there was something simpler or shorter for this application.
Thanks in advance.
|
If you have access to a 1/2" hex broach, it might be better to just drill and broach the bevel gear and use a standard CIM to hex adapter. Just a thought.