|
Re: West coast drive with versa frame bumper mounting
We put blocks in the corners of our bumpers, with a hole going straight down. Then on each corner of the chassis we have a clevis pin-like thing sticking up 1/2" from the neighboring edges of the chassis. Clevis pin goes into blocks in the corner of the bumper, then we stick in a pin. Very fast, very effective, as long as your clevis pins don't break (I recommend 5/16" diameter at least).
__________________
<Now accepting CAD requests and commissions>
Last edited by asid61 : 26-04-2016 at 17:56.
|