Thread: West coast drive with versa frame bumper mounting
View Single Post
  #5   Spotlight this post!  
Unread 26-04-2016, 18:50
mlantry mlantry is offline
I'm back
AKA: Matthew Lantry
no team
Team Role: Mentor
  
Join Date: Jan 2011
Rookie Year: 2011
Location: hillsdale NJ
Posts: 278
mlantry has much to be proud ofmlantry has much to be proud ofmlantry has much to be proud ofmlantry has much to be proud ofmlantry has much to be proud ofmlantry has much to be proud ofmlantry has much to be proud ofmlantry has much to be proud ofmlantry has much to be proud of
Re: West coast drive with versa frame bumper mounting
Quote:
Originally Posted by asid61 View Post
We put blocks in the corners of our bumpers, with a hole going straight down. Then on each corner of the chassis we have a clevis pin-like thing sticking up 1/2" from the neighboring edges of the chassis. Clevis pin goes into blocks in the corner of the bumper, then we stick in a pin. Very fast, very effective, as long as your clevis pins don't break (I recommend 5/16" diameter at least).
picture cause i'm not sure what you mean
__________________

Matthew Lantry
Team 4475 2014-present
-College Mentor 2014-????

Team 1676- 2011-2014
-Mechanical 2011-2014, Subteam leader 2013-2014
-Robot Operator 2014

George G. White FLL mentor 2011-2014

“Both optimists and pessimists contribute to our society. The optimist invents the airplane and the pessimist the parachute.”
Reply With Quote