Quote:
Originally Posted by BoilerMentor
Our bumpers, at the lowest they could physically be, were rarely in contact with the defenses, if ever, event the rock wall. If they'd been 1/2" higher they would have never contacted the defenses period.
|
Yes, that's the
point of having the zone begin as high as it does. Any lower and the bumpers
would be bumping some of the defenses. You were free to design your robot with its bumpers another half inch higher if you wanted to make it impossible to contact the defenses.
Quote:
|
Yes, if simple physical height from the arena floor is considered they interfere, but once you add the ramp at the edge of the defenses in conjunction with most competition proven drive trains and you don't need nearly the whole bumper zone.
|
It sounds like you're not aware that bumpers
cannot occupy the entire bumper zone. They are only 5 inches tall, while the zone is 8 inches from bottom to top.