|
Re: Best CAM software
HSMexpress/HSMworks FTW. It's free, it's easy, It works with solidworks and it doesn't suck.
If your fabrication team knows a bit of solidworks then I'd have them do the CAM. If your CAD team knows a bit of machining then they can do the CAM. I'n my experience these groups usually overlap.
__________________
2014-2015: FRC 865 Warp7 Team Captain
2016: FRC 865 Mentor
Last edited by mman1506 : 05-05-2016 at 01:04 AM.
|