Quote:
Originally Posted by Ether
Put the bot on blocks. In software, give the following commands...
|
Quote:
Originally Posted by rlounds
here's the list of things you asked for Ether. We're also using a Logitech Extreme 3D Pro for our joystick...
|
It sounds like you issued the commands by moving the joystick (hardware) instead of commanding them directly in software. Or am I misreading your post?
Quote:
Originally Posted by rlounds
Pure Forward:
Front Left = Not working at all
Strafe Right:
Front Left = Not working at all
Rotating clockwise:
Front Left = Not working at all
|
There is obviously something
very wrong here. I suggest you try to get to the bottom of this first:
Try swapping Front Right and Front Left PWM cables and re-run the test. See if the problem follows the cables.