07-05-2016, 17:54
|
 |
no bag, vex only, final destination
AKA: Pinecone
 FRC #0228 (GUS Robotics); FRC #2170 (Titanium Tomahawks) Team Role: Mentor
|
|
Join Date: Dec 2008
Rookie Year: 2006
Location: Glastonbury, CT
Posts: 7,718
|
|
|
Re: Workshop/Tools/Parts
Quote:
Originally Posted by asid61
Adding onto the rivet thing, I highly recommend just using all-aluminum rivets. They are far easier to drill out than steel, and in the event that a rivet is set badly (the mandrel breaks well above the head) it's still easy to remove. With steel rivets in that situation, you are basically screwed.
|
Aluminum rivets with steel mandrels are just as easy to remove, but install more reliably and are a smidge stronger. If you have the choice I'd get these.
__________________
Mentor / Drive Coach: 228 (2016-?)
...2016 Waterbury SFs (with 3314, 3719), RIDE #2 Seed / Winners (with 1058, 6153), Carver QFs (with 503, 359, 4607)
Mentor / Consultant Person: 2170 (2017-?)
---
College Mentor: 2791 (2010-2015)
...2015 TVR Motorola Quality, FLR GM Industrial Design
...2014 FLR Motorola Quality / SFs (with 341, 4930)
...2013 BAE Motorola Quality, WPI Regional #1 Seed / Delphi Excellence in Engineering / Finalists (with 20, 3182)
...2012 BAE Imagery / Finalists (with 1519, 885), CT Xerox Creativity / SFs (with 2168, 118)
Student: 1714 (2009) - 2009 Minnesota 10,000 Lakes Regional Winners (with 2826, 2470)
2791 Build Season Photo Gallery - Look here for mechanism photos My Robotics Blog (Updated April 11 2014)
|