[RoboChair]

Originally Posted by Fusion_Clint

This would be great, do you have a link to them?

http://www.veloxcncrouters.com/#!pro...c-(tool-qmtc-3)

Or the super cheap option
http://www.amazon.com/Lather-Milling...rds=er16+chuck
downside is that it's a 12mm shank and not 1/2", you just need to cut/grind the shank down to a usable length. I haven't found a 1/2" shank for ER collets that was under $80 but 12mm shank is under $13, it's really weird.