|
Re: swerve drive with arduino mega 2560
Sounds like it may not have the right com port selected.
On menu, go to "tools" then "port" and select port.
Then on menu, go to "tools" then "Get Board info" and see if it returns "Mega"
If not then go back to "ports" and select a different "port"
Then try to "Get board info"
Assuming the mega is plugged into the computer via usb cable, one of the ports will respond correctly.
Use that one, and try to upload again.
When uploading you will see LED activity on Mega board, rx and tx flickering.
__________________
The sooner we get behind schedule, the more time we have to catch up.
Last edited by tr6scott : 07-06-2016 at 15:07.
Reason: added led activity.
|