Thread: Electrical connectors on control system items
View Single Post
  #1   Spotlight this post!  
Unread 22-06-2016, 14:22
taichichuan's Avatar
taichichuan taichichuan is offline
Software Mentor
AKA: Mike Anderson
FRC #0116 (Epsilon Delta)
Team Role: Mentor
  
Join Date: Feb 2010
Rookie Year: 2010
Location: Herndon, VA
Posts: 328
taichichuan has much to be proud oftaichichuan has much to be proud oftaichichuan has much to be proud oftaichichuan has much to be proud oftaichichuan has much to be proud oftaichichuan has much to be proud oftaichichuan has much to be proud oftaichichuan has much to be proud oftaichichuan has much to be proud oftaichichuan has much to be proud of
Send a message via AIM to taichichuan
Re: Electrical connectors on control system items
I'd have to second the comments about hating JST connectors. While the retention is fairly good, these connectors are nearly impossible to fabricate reliably.

The T-plug connectors are fine for singleton connection. But, we frequently find ourselves with bundles of cables that the APPs allow us to gang together and key the connection in such a way that the connections can't be mis-connected. Yes, you really need the specialized crimper. But it's less than $50 and most other types of connectors (like the .1" PWM connectors), regardless of the type, require a specialized crimper to do it right.

The XT60 connectors are like the T-plug connectors. Great for singleton connections. The mechanical connection seems more robust to me over the T-plug connections. But, these connectors look like they need a special crimp tool or need to be soldered. So, I don't really see that these are any better than what we have already.

HTH,

Mike
Reply With Quote