Update three says:
Quote:
The following rules have been revised/clarified or updated
GM20. Robots may NOT intentionally:
- Tip any goal over
- Attach to the upper or lower plywood decks. (If enough
force is applied to either of these decks to move the goal
then you are considered to be attached).
- Deploy any sort of mechanism below the bottom plywood
deck or attach to the casters.
- Remove any of the 1” PVC from the goals.
GM21. In order to pick up or pull the goal in another direction, a
robot may ONLY grab onto the 16 metal pipes and their flanges
between the 2 plywood decks.
-- New Rule
GM 23. You may push on the vertical surface of the stainless steel
edges around the upper and lower plywood deck to move the goal in a new direction.
|
Is rule 23 superseding the other two? Because if you're pushing on a goal, and it moves, as 23 says you can, that would violate rule 20 as it is written above.
Someone help me out here.