|
Re: pic: Inverted Gearbox Concept
Quote:
Originally Posted by ratdude747
Maybe this isn't an issue, but the exposed 1st stage looks like an accident waiting to happen. If it were used one would want to be careful with the chassis design to make sure nothing (wires, etc.) would be in danger of getting nailed.
|
With every design like this, the first stage will be exposed. Of course, people should be careful about this, but perhaps a case can be made to go over the first stage. I can kind of imagine that happening with a 3d printer.
__________________
-KohKoh
115 MVRT, Driver (2013-2015)
649 M-SET, CAD (2015-2016)
299 Valkyrie Robotics, Mechanical Director (2016 - present)
|