Because I don't design outrageous things enough...
each drive side is 8.03lbs with everything shown (only thing that should be missing is the M4s to mount the 775s. Didn't design out the full frame because meh.
Ratios is a 12:100 off the 775's with a 24:24 spacing ratio down to the wheel.
I chained the wheels together before that gear spacing so that the chain did not have to be routed up after every wheel for ground clearance;
so there is a stage of gearing down to each individual wheel.
Feel free to tell me how ridiculous this is.
Sorry for the large pics
