Quote:
Originally Posted by pwnageNick
Yeah I generally only use button head or counter-sunk if I have to. However on the outisde of your drive I would have used button head since that's the very outside of the drive. It would make dealing with the bumper a bit easier.
|
^+1
I'm a big fan of the following combo on a robot which is what we used:
1/4-20 countersunk
1/4-20 button head
10-32 socket head
We had a few T handle 5/32 allen keys so when combined with riv nuts most of the robot came apart with one tool. On our wheels we used 1/4-20 socket heads and 5/16-18 button heads for our axles and wheel hubs. This meant we could use a 3/16 allen T handle for both as well.
Nice drive Greg!