View Single Post
  #3   Spotlight this post!  
Unread 14-09-2016, 14:40
ttnn58 ttnn58 is online now
Registered User
FRC #4586
 
Join Date: Jun 2016
Location: earth
Posts: 25
ttnn58 is an unknown quantity at this point
Re: custom button panel

Quote:
Originally Posted by Bkeeneykid View Post
Assuming you don't use FRC rule breaking space magic, you'll most likely just be building a joystick with no axes. You can use the TI Launchpad you received in your 2015 KOP, instructions here: http://processors.wiki.ti.com/index.php/MSP430_LaunchPad_Operator_Interface_for_FIRST_Robo tics_Competition. You can then read it from code just like any other joystick button. You don't have to use this one, any HID compliant joystick will work. This one just has FRC support.

Side note: You can read from autonomous, it just reads the last joystick value right before autonomous begins.
no axes indeed XD

but we won't use this one, i think we don't have it anymore.
we have some kind of prototyping kit.
if the comuputer can read the signal from the device, the robot code will just "find" it?
or we need another software for it?
Reply With Quote