View Single Post
  #2   Spotlight this post!  
Unread 20-09-2016, 20:16
teslalab2's Avatar
teslalab2 teslalab2 is offline
RogueBotix LLC
VRC #8091
Team Role: Mentor
 
Join Date: Feb 2015
Rookie Year: 2014
Location: Austin MN
Posts: 109
teslalab2 will become famous soon enoughteslalab2 will become famous soon enough
Re: Vex Motors With RoboRio

The vex 29 motor controllers should work if you plug them into the roboRIO just like a talon or what ever, they all send the same signal, if it doesn't work, its probably because the power bus the RIO is sending it is to low of current/voltage. All of the PWM motor controllers use the same signal.

I found this image on google, this is how you should wire it. http://4.bp.blogspot.com/-Xzhvsr9ip2...0/modified.png

make the new Vin and Gnd wire going to the Power distro board
__________________
I need a jaguar development board for reprogramming a jaguars bootloader. if you have one that you want to sell, pm me. thanks

Run you CanJaguars on arduino with ArduRIO, you can also easily control Talons, Victors,Jaguars and Sparks on PWM. https://sourceforge.net/projects/ardurio/

Last edited by teslalab2 : 20-09-2016 at 20:22.
Reply With Quote